Tag: earth moving equipment

Construction Equipment on the NYS Barge Canal, 1905-1920

The New York State Archives has a wonderful collection of Barge Canal Construction photographs that show the progress of construction of the new waterway throughout the years of 1903 to 1920. In these you might find images of what the area looked like prior to construction, the first shovelful of work, progress through the years, work that was disqualified due to poor construction, damage from floods and ice, and then the finished projects (and more). You can find these in collection 11833 (Barge Canal Construction Photos).

These images also provide a remarkable record of the early days of heavy earth moving construction machinery. In the early 1900s, the steam shovel was only about 25 years old, and once they “perfected” that versatile machine, the possibilities were endless. Do you need to shape a bank? The cantilevered conveyor is the machine you need. Need to move rocks from a deep channel cut? How about the double boom crane? Do you have soft soils? How about a cable-way? If there was a job to do, some inventor had a machine to do it. And many of these machines were used to dig the new Barge Canal.

The Barge Canal was not the first use of these machines. The Chicago Sanitary and Ship Canal, which was built in the 1890s, used many of the same machines. And it appears that some also were used on the Hennepin Canal construction.

Beginning with the Winter 2022 issue of the American Canals newsletter we have begun to look at these early machines. We will post the the same images from the articles, plus a few more, so you have the ability to enlarge and get a better look at their use and workings.

We start with Contract 40 which was the area of the big cut. This was the 5-mile section west of Lockport where the canal had to be cut through bedrock in order to reach the level of Lake Erie. This area was famous for its work during the construction of the original Erie Canal, and it posed the same challenges in 1900 with how to remove the massive quantities of rock from the channel.

The Brown Hoisting and Conveying Machine Company built this cantilevered conveyor. The machine was designed to remove spoils from the bank and deposit them directly behind the machine.
A close up of the Brown cantilevered excavator. A drag-line bucket runs along the arms and can be used to shape the banks. This machine was able to work in the navigation season. The machine sits of railroad style trucks.
You get a sense of the work with the shaped bank in the foreground and the vegetated bank behind it. A boat can be seen in the distance. The machine could also be used to lift skips of material that had been loaded by hand or team-shovel.
The Browning double-boom crane was designed to allow one boom to be working while the opposite one was dumping. This machine was used mostly to lift skips of rock out of the cut. Multiple skips would be in the work area either being loaded by men or using a steam-shovel.
You get a good sense of the scale of the work. The steam-shovel alone could never remove the rock so the double-boom crane is used to lift the rock out of the cut. The shovel would load a large skip and the crane would lift it clear. The machine would rotate 180-degrees and dump it’s load onto the spoils pile. At the same time, the boom over the canal would be lowering a empty skip into the cut.
Here you can see the skips, basically large baskets. This was July 1910 and the canal is in use. The canal cut is being widened down to the water level and the rest will be removed in the winter.
The Browning double-boom could also function as a drag-line by using only one of the booms and fitting it with a drag bucket. The machine sat on skids and would use it’s engines and capstans to drag itself around.
This view gives us a nice look at many of the machines used on the Barge Canal. The Brown Hoisting cantilever can be seen in the distance, which a Bucyrus steam-shovel loads skips on the Browning incline conveyor. The skips will run along the top of the track and then tip it’s load at the high end onto the spoils pile. A Lidgerwood cable-way flies over along the top of the photo.

Details on all these machines are featured in the Winter 2022 issue of American Canals. In upcoming issues we will take a look at more equipment used of the Barge Canal.